|
Available in 2 unique styles, stationary jet ski
lift or swinger jet ski lift models. While the stationary pwc lift simply travels
up and down, the swinger jet ski lift actually swings 180 degrees when in the
up position to allow the jet ski to be placed onto the dock for easy maintenance.
This helps prevent the tiresome task of getting the jetski to the launching ramp
for maintenance or re-fueling. A trully usefull function.
Both if Tide Tamer's
jet ski lifts are available in 1000lbs. or 1500lbs. capacity. Choose from piling
mount or sea wall mount in manual or electric winches. |
| |
1,000 lbs. Stationary or Swinger
Jet Ski Lift - 3 year manufacturer warrantyThis Tide Tamer's jet
ski lift has a 1,000lbs. load capacity and is available as a stationary jet ski
lift or a swinger jet ski lift. It is also easy to install! Tide
Tamer's jet ski lift is manufactured with corrosion-resistant, galvanized steel
construction...great for salt water! This jet ski lift also utilizes a 1/4"
stainless steel cable and a 10' mast that provides a full 7' of travel from dock
to water. Longer masts are available for an additional fee. And, with Tide Tamer's
48" arm length, it can handle up to a five foot wide boat! Choose from
piling mount or sea wall mount and manual or electric winch.
Jet
ski lift specs: - Rated for 1,000 lbs.
- Piling
mount model requires 8" piling, 30" above dock
- Dock mount requires
piling under dock - no height requirement
- 3-Year Structural Warranty
Electric
winch specs: - Rated for 1,000 lbs.
-
1/3 horse power PSI enclosed gear drive
- Optional remote control available
| |
|
| |
1,500 lbs. Stationary
or Swinger Jet Ski Lift - 3 year manufacturer warrantyThis
Tide Tamer's jet ski lift has a 1,500lbs. load capacity and is available as a
stationary jet ski lift or a swinger jet ski lift. It is also easy to install! Tide
Tamer's jet ski lift is manufactured with corrosion-resistant, galvanized steel
construction...great for salt water! This jet ski lift also utilizes a 1/4"
stainless steel cable and a 10' mast that provides a full 7' of travel from dock
to water. Longer masts are available for an additional fee. And, with Tide Tamer's
48" arm length, it can handle up to a five foot wide boat! Choose from
piling mount or sea wall mount and manual or electric winch.
Jet
ski lift specs: - Rated for 1,500 lbs.
- Piling
mount model requires 10" piling, 30" above dock
- Dock mount
requires piling under dock - no height requirement
- 3-Year Structural Warranty
Electric
winch specs: - Rated for 1,500 lbs.
-
1/2 horse power PSI enclosed gear drive
- Optional remote control available
| |
| Top of Page |
| | |
| | | | |
|
